|
||||||
|
Crankshafts 03.155 Manufactured by Elgin, Eagle, Scat 6088 409 stroker 5140 forged crankshaft crossdrilled balanced... Ea. $1109.00 6099 Recond stroker crank balanced... Ea. $659.00
6097
New Eagle 409 4" Stroker crank forged alloy steel cross drilled for internal balancing... Ea. $659.99 7019 Crankshaft shipping case... Ea. $40.00 7251 New Eagle or Scat 409 4.25" Stroker crank forged alloy steel for external balancing...Ea. $899.00 7337 348/409 crank pin... Ea. $5.00
Connecting Rods 03.160 5696Big block Chevy 6.135 rods, pressed pins 3/8 ARP bolts... Set $375.00 6350 348 Reconditioned... Ea. $30.00
6819Eagle Forged I beam rods 6.135 press fit, 7/16 ARP bolts... Set $299.95 7205 409 new connecting rods, press fit... Ea. $38.00 7205S Set of 8 part #7205... Set $299.00 7206 Big block Chevy rods 6.135 I Beam, floating pins 7/16 ARP bolts... Set $240.00 7207 Big block Chevy rods 6.385 I Beam, floating pins 7/16 ARP bolts... Set $240.00 7225 409 new connecting rods, floated... Ea. $38.00 7225S Set of 8 part #7225... Set $299.00 $8.00 Core on Reconditioned rods. 7851 348/409 Calles H beam rods 7/16 bolts 6.135 bronze bushing... Set $599.00 7852 348/409 Calles H beam rods 7/16 bolts 6.385 bronze bushing... Set $599.00
Cast Piston Ring Sets 03.170 Manufactured by Hastings. Also available in Sealed Power, Perfect Circle and Grant 3340 348 Cast... Set $49.95 3340P20 348 Cast... Set $49.95 3340P30 348 Cast... Set $49.95 3340P40 348 Cast... Set $49.95 3340P60348 Cast... Set $49.95 3340P80 348 Cast... Set $49.95 3340P100 348 Cast... Set $49.95 3340P125348 Cast... Set $49.95 3340A 409 Cast... Set $64.95 3340AP20 409 Cast... Set $64.95 3340AP30 409 Cast... Set $64.95 3340AP40 409 Cast... Set $64.95 3340AP60 409 Cast... Set $64.95 3340AP70 409 Cast... Set $64.95 3340AP80 409 Cast... Set $64.95 3340AP90 409 Cast... Set $64.95 3340AP100 409 Cast... Set $64.95 3340AP120 409 Cast... Set $64.95 3340AP125 409 Cast... Set $64.90 KD2284 Thin wall ring compressor for 348/409...Ea. $18.99
Chrome Moly Piston Ring Sets 03.170 Manufactured by Hastings. Also available in Sealed Power, Perfect Circle and Grant 3341 348 Moly... Set $64.90 3341P20 348 Moly... Set $64.90 3341P30 348 Moly... Set $64.90 3341P40 348 Moly... Set $64.90 3341P60 348 Moly... Set $64.90 3341P70 348 Moly... Set $64.90 3341P100 348 Moly... Set $64.90 3341P120 348 Moly... Set $64.90 3341P125 348 Moly... Set $64.90 3341A 409 Moly Standard bore... Set $74.95 3341AP10 409 Moly... Set $74.95 3341AP20 409 Moly... Set $74.95 3341AP30 409 Moly... Set $74.95 3341AP40 409 Moly... Set $74.95 3341AP60 409 Moly... Set $74.95 3341AP70 409 Moly... Set 74.95 3341AP80 409 Moly... Set $74.95 3341AP90 409 Moly... Set $74.95 3341AP100 409 Moly... Set $74.95 KD2284 Thin wall ring compressor for 348/409...Ea. $18.99
File Fit Rings 03.170
6747
409 Hastings cast file fit Rings... Set $59.95
6748
409 Hastings Moly file fit rings... Set $79.95 6748P100 409 Hastings Moly file fit rings, 100 over... Set $79.95
6749
409 Hastings sealed power cast file fit rings... Set $64.95 6750 409 Hastings Sealed Power Moly File Fit Rings... Set $79.95
6750P10
409 Hastings sealed power moly file fit rings, 10 over... Set $79.95 7336 348 Moly file fit rings 5/64, 5/64. 3/16 ring lands... Set $125.00 7336P30 348 Moly file fit rings 5/64, 5/64. 3/16 ring lands .30 over... Set $130.00
Moly File Fit Rings W/1/16, 1/16, 3/16 Ring Lands 03.170 7634 409 Moly file fit rings, 1/16, 3/16... Set $125.00 7634P20 409 Moly file fit rings, 1/16, 3/16, 20 over... Set $125.00 7634P30 409 Moly file fit rings, 1/16, 3/16, 30 over... Set $125.00 7634P40 409 Moly file fit rings, 1/16, 3/16, 40 over... Set $125.00 7634P48 409 Moly file fit rings, 1/16, 3/16, 48 over... Set $125.00 7634P60 409 Moly file fit rings, 1/16, 3/16, 60 over... Set $125.00
Cast Piston Rings for One Piston 03.170 7029 348 cast... Set $11.50 7029P20 348 cast, 20 over... Set $11.50 7029P30 348 cast, 30 over... Set $11.50 7029P40 348 cast, 40 over... Set $11.50 7029P60 348 cast, 60 over... Set $11.50 7039 409 cast... Set $11.50 7039P20 409 cast... Set $11.50 7039P30 409 cast... Set $11.50 7039P40 409 cast... Set $11.50 7039P60 409 cast... Set $11.50
Moly Piston Rings for One Piston 03.170 7034 348 Moly... Set 23.07 7034P20 348 Moly, 20 over... Set 23.07 7034P30 348 Moly, 30 over... Set 23.07 7034P40 348 Moly, 40 over... Set 23.07 7034P60 348 Moly, 60 over... Set 23.07 7044 409 Moly... Set $23.07 7044P20 409 Moly, 20 over... Set $23.07 7044P30 409 Moly, 30 over... Set $23.07 7044P40 409 Moly, 40 over... Set $23.07 7044P60 409 Moly, 60 over... Set $23.07 7309P60 348 1 PIST MOLY RING... Set $23.07
Rod Bearings 03.210
Clevite-77
3342-.002
348/409 .002 set of 8... Set $49.95 7210 348/409 .002 set of 8... Set $39.85
Racing Rod Bearings 03.210
Clevite H Series
Rod Bearings 03.210 Imported
3342A 348/409 Standard set of 8... Set $26.50
Racing Main Bearings 03.210
Clevite H Series
Main Bearings 03.210
Mixed Name Brands 3343-.001 348/409 Main bearings... Set $229.00
Federal Mogel 3347H Pro Racing Main Bearings Standard... Set $195.00 3347H.001 Federal Pro Racing Main Bearings .001... Set $195.00
Imported 6733-40 348/409 .040... Set $129.00 Clevite-77 3348-10 Main Bearing Set .010 under... Set $239.50
Camshaft Bearings 03.250
Clevite-77
Lifters 03.300 Manufactured by Isky, Comp Cams, Edelbrock, Elgin & Dynagear
3327
58-64 hydraulic... Set $44.95
6017
58-65 348/409 Isky Hydraulic lifters, set of 16... Set $128.58 7482 58-65 Edelbrock 348/409 Hydraulic roller lifter, set of 16... Set $484.99 7542 348/409 Isky Hydraulic roller lifter set...Set $453.22 7740 Comp Cams high energy hydraulic lifters, set of 16... Set $72.95 7744 Comp Cams solid lifters, set of 16... Set $90.75 7750 Comp Cams mechanical roller lifters, set of 16... Set $420.00 8138 348/409 Solid lifters w/ .012 oil hole, set of 16... Set $159.95 8139 Isky Solid lifters w/ .024 oil hole, set of 16... Set $193.80 8263 348/409 Solid Lifter, 1 per pack... $5.50
Oil Galley Plugs 03.310
3885
58-65 348/409 Oil Galley Plugs 5/16" press
in (4)... Set $14.28
Freeze/Expansion Plugs 03.310
4033A 58-65 348/409 steel freeze plugs... Set $11.50 5491 58-68 348/409 Brass freeze plugs... Set $27.00
Hardware 03.310 6682 348/409 Hardware finishing kit (Head and timing cover dowel pins, cam bolts, crankshaft keys... Kit $12.00
Gasket Rebuild Kits 03.350 5657 348/409 low perf engine rebuild gasket and seal kit with composite head gaskets (Show Cars Best)... Kit $117.30
5657S3
348 engine rebuild gasket and seal kit with steel shim head gaskets (Show Cars Best)... Kit $149.50 7445 348/409 Victor Engine re-build gasket set...Kit $89.99 7446 409 Victor Hi performance engine re-build gasket set...Kit $89.99
3349
348/409 Rubber Valve cover w/tabs... Pr. $14.85 3350 348 all and 409 low performance intake... Set $21.95 3351 409 Hi performance intake... Set $21.95 3575 348/409 head gasket, 045 steel shim. Fel-Pro 3 layers... Ea. $27.22 3575A Head gasket sealant spray... Ea. $9.95 3575C348/409 head gasket, .045 non steel composite... Ea. $23.00 3575S4 409 Steel shim head gasket embossed .022... Ea. $24.75 3580 348/409 Exhaust manifold... Set $10.15
3581 All years fuel pump gaskets... Ea. $2.48 3587 All 8 cylinder water outlet gasket... Ea. $2.15
3588 348/409 Water pump to block gasket... Ea. $3.75 5641 348/409 Header gaskets... Set $14.50 5648 Timing cover crankshaft seal... Ea. $9.50
5817
Copper head gaskets, .043... Pr. $162.99 5911 348/409 distributor gasket... Ea. $2.00 5921 348/409 Valve cover bolt gasket, 12 pieces... Set $6.00 6202348/409 water pump rebuilt gasket... Ea. $3.00
6269Head bolt thread sealant... Tube $9.25 6556 348/409 head gasket, .055 non-steel composite... Ea. $28.00
6710
348/409 3/8" Valve cover gaskets... Pr. $30.00 7320 348/409 Remflex high-temp graphite header gaskets (3000 ºF), seals warped and pitted flanges, no re-torquing required, 6- month guarantee not to leak... Set $39.95 7534 348/409 Copper gasket... set $35.00 7633 348/409 Outer gasket for 2 pc. timing cover...Ea. $5.99 7754 348/ 409 3" copper header gasket 3 hole collector...Pr. $20.00 7883 Edelbrock top end large port head gasket set. Includes- head, intake (No end gaskets) Exhaust, valve cover & intake exhaust restrictor...Set. $113.00 7884 Edelbrock head gasket (pair)...Pr. $79.25 7885 Edelbrock intake gasket (large port) pair...Pr. $22.25 7886 Edelbrock intake gasket (small port) pair...Pr. $15.25 7887 Edelbrock exhaust gaskets (large port) pair...Pr. $17.50 7888 Edelbrock valve cover gaskets (core-reinforced) pair...Pr. $33.35
Seals 03.350 3585 58 early rear main seal, rope... Ea. $12.95 3584 58-64 rear main seal, 2 piece poly 348/409... Ea $19.65
3584G
59-65 RR main cap seal... Ea. $3.00 Always use spray sealant on all head gaskets and sealer on all head bolts.
Rocker Arms 03.370 Manufactured by Elgin, Comp Cams, Scorpion & Crane. 5460 348/409 Comp-Cams roller tip rocker arms for 3/8 studs (16)... Set $234.00 5460A 348/409 Comp Cams roller tip rocker arms for 7/16 studs (16)... Set $167.00 *Note: when installing roller rockers on a 348 or 409 you must machine the stud boses and install screw-in studs. 5681 348/409 Rocker arm studs press in type over size .003, set of 16... Set $38.75
5681A 3/8 press in rocker arm stud +.003... Ea. $2.45
5683
348/409 Rocker arm screw in type 7/16, set of 16... Set
$24.00
5684A 3/8 Rocker arm ball, set of 16... Set $9.95 5685A 7/16 rocker arm balls... Set $9.95
5823
348/409 Scorpion 3/8" Roller Rocker 1.75 ratio... Set
$266.97 5956 348/409 3/8" rocker screw in studs w/o hex... Set $18.00 5962 348/409 Valve cover extension 3/16 steel... Ea. $24.75 6068 348/409 Crane Gold Race roller rocker arms for 3/8 studs... Set Call
6170 ARP 7/16 Screw in stud, OAL 2.650, Rocker arm end 1.925-true
flat end for poly-locks... Set $49.00
6689
348/409 Rocker arm stud roll pins... Set
$4.00
6738
348/409 Scorpion 3/8 stud, 1.70 ratio roller rockers... Set $252.97
Valve Springs (See Book of Numbers for More Specifications) 03.410 Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will RPM to 8000 if you do not have the correct springs. The use of the wrong valve springs is one of the most common causes of engine failure. Another is the incorrect installation of the valve springs. Valve Spring Check List: 1. Use only the valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. 2. Once the valve springs have been installed, it is important to check for coil bind. This means that when the valve is fully open there must be a minimum of .060" clearance between the coils of both the inner and outer springs. If this clearance does not exist, you must either change the retainer or the valve to gain more installed height, or change to a spring that will accommodate more lift or machine the spring seat for extra depth. 3. It is important for new springs to take a heat set. Never abuse or run the engine at high RPM when the springs are new. Upon initial star-up, limit RPM to 1500-2000 until the temperature has reached operating levels. Shut the engine off and allow the springs to cool to room temperature. This will usually eliminate early breakage and prolong spring life. After the spring has been "broken in", it is common for it to lose a certain amount of pressure. Once this initial pressure loss occurs, the spring pressure should remain constant until the spring becomes over stressed. Then the Valve springs must either be replaced or shimmed to the correct pressure.
3357OD-1.345, ID -.910, coil bind 1.140. Spring with dampner fits some stock retainers and oil shields on all 348 except 1147 heads, installed height 1.680 at 80lbs and cam lift to .500 at 210 lbs (green)... Set $ 89.95
3358 OD-1.439, ID-.960, Coil bind at 1.080. Spring with dampner will not fit stock retainers and oil shields at installed height of 1.680 at 80 lbs and cam lift to .530 at 250lbs.(Yellow)... Set $59.00
3359 OD-1.497, ID-1.040, coil bind 1.080 Spring with dampner will not fit high performance 409 stock retainers and oil shields. Installed height 1.680 at 85lbs and cam lift to.525 at 270lbs (white)... Set $59.00
5705 OD-1.500, ID-1.086, Coil bind .950. Spring with dampner will not fit high performance 409 stock retainers and oil shields. Installed height of 1.680 at 90lbs cam lift to .670 at 355lbs when installed at 1.730 at 85 lbs cam lift to .700 at 355 lbs (Red)... Set $165.00
5722 OD-1.460, ID- 1.095, coil bind .950. Dual spring reverse wound, will not fit stock retainers and oil shields, must cut OD of valve guide boss to fit inner springs, At installed height of 1.680 at 110lbs and cam lift to .700 at 375 lbs when installed at 1.730 at 105lbs cam lift to .700 at 360lbs (Blue & Red)... Set $131.00
5929 OD-1.500, ID-1.010, Coil bind 1.080 Spring with dampner will not fit stock retainers and oil shields. Installed height 1.680 at 125 lbs and cam lift to .530 at 345lbs, when installed height at 1.730 at 120lbs has cam lift to .580 with 335lbs (Yellow, Red & White)... Set $ 125.00
5963 OD-1.220, ID-.632. coil bind 1.160. Dual spring reverse wound fits stock retainers and oil shields on 348 w/1147 heads and 409 w/817 heads, installed height 1.680 at 110 lbs and cam lift to .465 at 290lbs... Set $118.00
6090 OD-1.554, ID-.896, Coil bind .900. Roller cam dual valve spring, will not fit high performance 409 stock retainers and oil shields. Installed height 1.680 a 230 lbs and cam lift to .700 at 490 lbs when installed height is 1.730 at 200lbs cam lift to .750 at 490lbs (Orange)... Set $135.95
7178 OD 1.460, ID .995, coil bind 1.120, spring with flat dampner installed at 1.730 at 125 lbs has cam lift to .565 at 315 lbs... Set $131.00
7179 OD 1.470, ID 1.030, coil bind at 1.090, spring with flat dampner installed at 1.680 at 110 lbs has cam lift to .565/325 lbs, installed at 1.730 at 125 lbs has cam lift to .615/325 lbs... Set $131.00
7195 OD-1.450 ID-.700 Coil bind at 1.020. Dual spring. Reverse wound. Will not fit stock retainers and oil shield. Must cut OD of valve guide boss to fit inner springs at installed height of 1.680 at 135 lbs. and cam lift to .600 at 445 lbs. when installed at 1.730 at 125 lbs. Valve lift to .650 at 445 lbs. (Yellow & Blue)... Set $116.00
7196 OD-1.450 ID-.700 Coil bind at 1.050. Dual spring. Reverse wound. Will not fit stock retainers and oil shields. Must cut OD of valve guide boss to fit inner spring at installed height of 1.680 at 135 lbs and cam lift to .575 at 445 lbs when installed at 1.730 at 125 lbs valve lift to .625 at 445 lbs... Set $99.95
7394 OD-1.550, ID-.1.120, coil bind 1.125, for Edelbrock heads (#7366, 7367), single spring with dampener, not for use on original GM
heads, installed height 1.885 at 130 lbs and a cam lift to .520 at 320 lbs., .560 at 340 lbs., .600 at 360 lbs... Set
$103.99
7411
Valve springs for Edelbrock OD= 1.510 ID=1.110 single w/ dampner seat 100/1.88, 275/1.380 coil bind=1.300 max lift .520... set $129.00 7413 Valve spring set for Edelbrock alum. heads OD=1.540 / ID=.750... Set $165.00 7414 Valve springs for Edelbrock heads dual w/ dampner seat 200/1.950, 600/1.200 coil bind 1.150 max lift .730... Set $165.00
Valve Spring Retainers 03.430
Most heads and stock retainers are not good for
more than .530 lift without machining valve guide boss. SC retainers
(3359B) are .300 tall and are good for .630 lift without machining.
3359A
348/409 Retainer for umbrella W/ID .990 7"... Set
$69.75
3359C348/409 Retainer W/ID .965 7"... Set $69.00 6091 348/409 Oil shield umbrella, use on springs with a 1.250 OD or less... Set $35.00 6094 348/409 Spring retainers for roller cams 10"... Set $69.75 6306 348/409 retainer for #6108 springs... Set. $65.00 7398 Edelbrock valve spring seat locators (use w/409 aluminum heads)... Set $54.99 7399 Edelbrock valve locks 11/32" stem... Set $34.99 7395 Edelbrock valve spring retainers... Set $54.99 7402 Spring locators for Edelbrock heads... Set $64.95 7406 Spring top retainer set 10 degree for 11/32" valve... Set $79.75
Timing Sets 03.450
3346 348/409 chain & gear set, steel gears OEM,
made in USA, (Good)... Set $43.03 6029-5 348/409 cloyes roller timing set .005 under... Set $169.00 6029-10 348/409 cloyes roller timing set .010 under... Set $139.00 6391348/409 Oil slinger... Ea. $24.00 7765 348/409 True roller timing chain gear set with big block crank snout... Set. $50.00 For Bolts, Clips, and Screws please see Group 25.
Engine Lube 03.490 3967 Ultra slick engine assembly lube... Ea. $3.50
Miscellaneous 03.990 5930 58-65 Eng. rebuild pak... Ea. $19.95 6183 Engine/Transmission Dolly heavy duty stand no wheels... Ea. $49.00
|
|||||
Inventory
